metabuilder/cadquerywrapper/examples/Ex101_InterpPlate.py

from math import sin, cos, pi, sqrt
import cadquery as cq

# TEST_1
# example from PythonOCC core_geometry_geomplate.py, use of thickness = 0 returns 2D surface.
thickness = 0
edge_points = [(0.0, 0.0, 0.0), (0.0, 10.0, 0.0), (0.0, 10.0, 10.0), (0.0, 0.0, 10.0)]
surface_points = [(5.0, 5.0, 5.0)]
plate_0 = cq.Workplane("XY").interpPlate(edge_points, surface_points, thickness)
print("plate_0.val().Volume() = ", plate_0.val().Volume())
plate_0 = plate_0.translate((0, 6 * 12, 0))
show_object(plate_0)

# EXAMPLE 1
# Plate with 5 sides and 2 bumps, one side is not co-planar with the other sides
thickness = 0.1
edge_points = [
    (-7.0, -7.0, 0.0),
    (-3.0, -10.0, 3.0),
    (7.0, -7.0, 0.0),
    (7.0, 7.0, 0.0),
    (-7.0, 7.0, 0.0),
]
edge_wire = cq.Workplane("XY").polyline(
    [(-7.0, -7.0), (7.0, -7.0), (7.0, 7.0), (-7.0, 7.0)]
)
# edge_wire = edge_wire.add(cq.Workplane("YZ").workplane().transformed(offset=cq.Vector(0, 0, -7), rotate=cq.Vector(45, 0, 0)).polyline([(-7.,0.), (3,-3), (7.,0.)]))
# In CadQuery Sept-2019 it worked with rotate=cq.Vector(0, 45, 0). In CadQuery Dec-2019 rotate=cq.Vector(45, 0, 0) only closes the wire.
edge_wire = edge_wire.add(
    cq.Workplane("YZ")
    .workplane()
    .transformed(offset=cq.Vector(0, 0, -7), rotate=cq.Vector(45, 0, 0))
    .spline([(-7.0, 0.0), (3, -3), (7.0, 0.0)])
)
surface_points = [(-3.0, -3.0, -3.0), (3.0, 3.0, 3.0)]
plate_1 = cq.Workplane("XY").interpPlate(edge_wire, surface_points, thickness)
# plate_1 = cq.Workplane("XY").interpPlate(edge_points, surface_points, thickness) # list of (x,y,z) points instead of wires for edges
print("plate_1.val().Volume() = ", plate_1.val().Volume())
show_object(plate_1)

# EXAMPLE 2
# Embossed star, need to change optional parameters to obtain nice looking result.
r1 = 3.0
r2 = 10.0
fn = 6
thickness = 0.1
edge_points = [
    (
        (r1 * cos(i * pi / fn), r1 * sin(i * pi / fn))
        if i % 2 == 0
        else (r2 * cos(i * pi / fn), r2 * sin(i * pi / fn))
    )
    for i in range(2 * fn + 1)
]
edge_wire = cq.Workplane("XY").polyline(edge_points)
r2 = 4.5
surface_points = [
    (r2 * cos(i * pi / fn), r2 * sin(i * pi / fn), 1.0) for i in range(2 * fn)
] + [(0.0, 0.0, -2.0)]
plate_2 = cq.Workplane("XY").interpPlate(
    edge_wire,
    surface_points,
    thickness,
    combine=True,
    clean=True,
    degree=3,
    nbPtsOnCur=15,
    nbIter=2,
    anisotropy=False,
    tol2d=0.00001,
    tol3d=0.0001,
    tolAng=0.01,
    tolCurv=0.1,
    maxDeg=8,
    maxSegments=49,
)
# plate_2 = cq.Workplane("XY").interpPlate(edge_points, surface_points, thickness, combine=True, clean=True, Degree=3, NbPtsOnCur=15, NbIter=2, Anisotropie=False, Tol2d=0.00001, Tol3d=0.0001, TolAng=0.01, TolCurv=0.1, MaxDeg=8, MaxSegments=49) # list of (x,y,z) points instead of wires for edges
print("plate_2.val().Volume() = ", plate_2.val().Volume())
plate_2 = plate_2.translate((0, 2 * 12, 0))
show_object(plate_2)

# EXAMPLE 3
# Points on hexagonal pattern coordinates, use of pushpoints.
r1 = 1.0
N = 3
ca = cos(30.0 * pi / 180.0)
sa = sin(30.0 * pi / 180.0)
# EVEN ROWS
pts = [
    (-3.0, -3.0),
    (-1.267949, -3.0),
    (0.464102, -3.0),
    (2.196152, -3.0),
    (-3.0, 0.0),
    (-1.267949, 0.0),
    (0.464102, 0.0),
    (2.196152, 0.0),
    (-2.133974, -1.5),
    (-0.401923, -1.5),
    (1.330127, -1.5),
    (3.062178, -1.5),
    (-2.133975, 1.5),
    (-0.401924, 1.5),
    (1.330127, 1.5),
    (3.062178, 1.5),
]
# Spike surface
thickness = 0.1
fn = 6
edge_points = [
    (
        r1 * cos(i * 2 * pi / fn + 30 * pi / 180),
        r1 * sin(i * 2 * pi / fn + 30 * pi / 180),
    )
    for i in range(fn + 1)
]
surface_points = [
    (
        r1 / 4 * cos(i * 2 * pi / fn + 30 * pi / 180),
        r1 / 4 * sin(i * 2 * pi / fn + 30 * pi / 180),
        0.75,
    )
    for i in range(fn + 1)
] + [(0, 0, 2)]
edge_wire = cq.Workplane("XY").polyline(edge_points)
plate_3 = (
    cq.Workplane("XY")
    .pushPoints(pts)
    .interpPlate(
        edge_wire,
        surface_points,
        thickness,
        combine=False,
        clean=False,
        degree=2,
        nbPtsOnCur=20,
        nbIter=2,
        anisotropy=False,
        tol2d=0.00001,
        tol3d=0.0001,
        tolAng=0.01,
        tolCurv=0.1,
        maxDeg=8,
        maxSegments=9,
    )
)
print("plate_3.val().Volume() = ", plate_3.val().Volume())
plate_3 = plate_3.translate((0, 4 * 11, 0))
show_object(plate_3)

# EXAMPLE 4
# Gyroïd, all edges are splines on different workplanes.
thickness = 0.1
edge_points = [
    [[3.54, 3.54], [1.77, 0.0], [3.54, -3.54]],
    [[-3.54, -3.54], [0.0, -1.77], [3.54, -3.54]],
    [[-3.54, -3.54], [0.0, -1.77], [3.54, -3.54]],
    [[-3.54, -3.54], [-1.77, 0.0], [-3.54, 3.54]],
    [[3.54, 3.54], [0.0, 1.77], [-3.54, 3.54]],
    [[3.54, 3.54], [0.0, 1.77], [-3.54, 3.54]],
]
plane_list = ["XZ", "XY", "YZ", "XZ", "YZ", "XY"]
offset_list = [-3.54, 3.54, 3.54, 3.54, -3.54, -3.54]
edge_wire = (
    cq.Workplane(plane_list[0]).workplane(offset=-offset_list[0]).spline(edge_points[0])
)
for i in range(len(edge_points) - 1):
    edge_wire = edge_wire.add(
        cq.Workplane(plane_list[i + 1])
        .workplane(offset=-offset_list[i + 1])
        .spline(edge_points[i + 1])
    )
surface_points = [(0, 0, 0)]
plate_4 = cq.Workplane("XY").interpPlate(edge_wire, surface_points, thickness)
print("plate_4.val().Volume() = ", plate_4.val().Volume())
plate_4 = plate_4.translate((0, 5 * 12, 0))
show_object(plate_4)